USB Comparison: One port to connect them all!

Look around your house and chances are you have at least a few devices that use Universal Serial Bus. On average, some 3 billion USB ports are shipped each year, making it by far the most successful peripheral connection type in the world.

-----UPDATE USB3.2----

USB (Universal Serial Bus)

The existing USB 3.1 can transfer data at up to 10 gigabits per second using two lanes (5Gbps per lane), but the new USB 3.2 tech aims to double that to 20Gbps, or 2GB/sec, by allowing for 10Gbps per lane.

However, the devices you’re using will have to support the newest USB hardware and come with the modern USB-C connectors.

USB-C has long been touted as the universal standard that will save us all, a single port that can charge your phone, your laptop, your tablet, your Bluetooth speaker, and even your Nintendo console, all through a single common port.

With that in mind, the USB 3.0 Promoter Group — which counts Apple, HP, Intel, Microsoft, Texas Instruments, and others among its members — just announced another USB-C specification: USB 3.2. It will support “multi-lane operation” that, in theory, will allow devices utilizing it to transfer multiple lanes of data at the same time. Put simply: it’s faster than regular USB 3.0, allowing up to two lanes of 5Gbps or two lanes of 10Gbps operation.

Another benefit of USB 3.2 is that it will work with USB 3.0 and earlier devices, and requires only a minor hub update to “assure seamless transitions between single and two-lane operation.”

And that, for now, is all you need to know.

The USB 3.2 specification is now in a final draft review phase, but the formal release is planned to go ahead in time for the USB Developer Days North America event in September.

In fact, device manufacturers are so confident in the new USB-C standard that Intel announced last year that Thunderbolt 3, once thought to be a USB replacement, will use the same port type as USB-C.

This means every Thunderbolt 3 port will also work as a USB-C port and every Thunderbolt 3 cable will work as a USB-C cable.

Before you can fully appreciate what a leap forward both USB Type-C and Thunderbolt 3 are, let’s familiarize you with Type-A, Type-B, and the various versions of the Thunderbolt standard.

Thunderbolt

Prior to Thunderbolt 3, Thunderbolt 2 and the original Thunderbolt shared the same cable type and port (which is the same port type as Apple’s Mini DisplayPort) and had top data transfer speeds of 20Gbps and 10Gbps, respectively. With these older Thunderbolt standards, the cable was active, meaning the cable itself is a device that requires power to operate (which is why most Thunderbolt 1 or 2 devices would require an external power source in order to function.)

This made Thunderbolt a much more expensive solution, as the cable itself is some 10 times more expensive than a USB cable of the same length.

Thunderbolt 3 is due to start shipping during the last quarter of 2015. Thunderbolt 3 will utilize a different connector than Thunderbolt/Thunderbolt 2 (using the physical port of USB C and Display Port 1.3).

At 40 Gbps, Thunderbolt 3 doubles its theoretical potential for speed when compared to Thunderbolt 2 (20 Gbps). Thunderbolt 3 (40 Gbps) is QUADRUPLE the speed of the original Thunderbolt, as well as being quadruple the speed of the recently released USB 3.1 ports.

Furthermore, unlike previous versions of Thunderbolt, users will be able to use Thunderbolt 3 ports as a Display Port or as a USB 3.1-C port (USB 3.1’s compact port). Thunderbolt 3 will be able to provide 15 watts of power (with up to a 100 watts of optional power) to their devices. This means (assuming the device has a compatible connector), that users will be able to charge their docks and cell phones and other USB and Thunderbolt devices using a Thunderbolt 3 port.

A few proprietary USB cables for Samsung and Apple devices.

Here’s how Thunderbolt 3 is different from its predecessors:

The Mini DisplayPort connection type has been ditched in favor of a USB-C connection type.

All Thunderbolt 3 cables will work as USB-C cables.

All USB-C cables will work as Thunderbolt 3 cables as long as they are good quality cables.

Thunderbolt 3 has a top data transfer speed of 40Gbps as long as the cable is 0.5m (1.6 ft.) or shorter.

For 1m (3.2 ft.) or longer cables, Thunderbolt 3 supports passive (cheaper) ones that have a top speed of 20Gbps, and active cables (more expensive) that retain the 40Gbps speed.

Thunderbolt 3 is backward-compatible with earlier versions of Thunderbolt, but due to the new port type, adapters are required to use legacy Thunderbolt devices.

Any USB-C device (like a Google Pixel) plugged into a Thunderbolt 3 port will function normally.

Since Thunderbolt 3 devices use discrete Thunderbolt chips to function, they will not function if plugged into a USB-C port.

All versions of Thunderbolt allow for daisy-chaining up to six devices together to a host and in addition to data, can also carry Hi-Def video and audio signals.

For the most part, Type-A ends (left of the coin) of the USB cables remains the same across existing USB versions.

USB:

In the USB world, things are a bit more complicated because there have been more versions and types than Thunderbolt.

Generally, the versions refer to the speed and functionality of the USB cable, while the USB type refers to the physical shape and the wiring of the ports and plugs. Let’s start with the USB type.

For the most part, Type-A ends (left of the coin) of the USB cables remains the same across existing USB versions.

USB Type-A

Also known as USB Standard-A, USB Type-A is the original design for the USB standard and uses a flat rectangular shape.

On a typical USB cable, the Type A connector, aka the A-male connector, is the end that goes into a host, such as a computer.

And on a host, the USB port (or receptacle) where the Type A-male is inserted, is called an A-female port. Type-A ports are mostly in host devices, including desktop computers, laptops, game consoles, media players and so on. There are very few peripheral devices that use a Type-A port.

Different USB versions including USB 1.1, USB 2.0 and USB 3.0 (more on differing versions below) currently share the same USB Type-A design. That means a Type-A connector is always compatible with a Type-A port event if the device and host use different USB versions. For example, a USB 3.0 external hard drive also works with a USB 2.0 port, and vice versa.

Type-A USB port for USB 3.0 (blue) and USB 2.0 on the back of a computer.

Similarly, small devices such as a mouse, keyboard or network adapter that have hard-wired USB cables always use Type-A connectors. That’s true also for gadgets without cables, such as a thumb drive.

USB 3.0’s connectors and ports have have more pins than USB 2.0. This is in order to deliver faster speeds and higher power output. However, these pins are organized in a way that doesn’t prevent them from physically working with the older version.

Also note that there are smaller Type-A plugs and connectors, including Mini Type-A and Micro Type-A, but there are very few devices that use these designs.

Popular USB Type-B: From left Standard-B, Mini-B, Micro-B, Micro-B USB 3.0, and Standard-B USB 3.0.

USB Type-B:

Typically, the Type-B connector is the other end of a standard USB cable that plugs into peripheral device (such as a printer, a phone or an external hard drive). It’s also known as Type B-male. On the peripheral device, the USB port is called Type B-female.

Since the peripheral devices vary a great deal in shape and size, the Type-B connector and its respective port also come in many different designs. Up to now there have been five popular designs for the USB Type-B’s plugs and connectors. And since the Type-A end of a USB cable remains the same, the Type-B end is used to determine the name of the cable itself.

The original standard (Standard-B): This design was first made for USB 1.1 and is also used in USB 2.0. It’s mostly for connecting large peripheral devices, such as printers or scanners to a computer.

Mini-USB (or Mini-B USB): Significantly smaller, the Mini-USB Type-B ports are found in older portable devices, such as digital cameras, phones and older portable drives. This design is now close to obsolete.

Micro-USB (or Micro-B USB): Slightly smaller than Mini-USB, the Micro-USB Type-B port is currently being replaced by USB-C as the charging and data port for latest phones and tablets.

Micro-USB 3.0 (or Micro-B USB 3.0): This is the widest design and mostly used for USB 3.0 portable drives. Most of the time, the Type-A end of the cable is blue.

Standard-B USB 3.0: This design is very similar to the Standard-B, however, it’s designed to handle USB 3.0 speed. Most of the time, both ends of the cable are blue.

Note that: There’s also another, less popular, USB 3.0 Powered-B plug and connector. This design has two additional pins to provide extra power to the peripheral device. Also, there’s a relatively rare Micro Type-AB port that allows the device to work as either a host or a peripheral device.

A few proprietary USB cables for Samsung and Apple devices.

Proprietary USB:

Not all devices use the standard USB cables mentioned above. Instead, some of them use a proprietary design in the place of the Type-B plug and connector. The most famous examples of these devices are the iPhone and the iPad, where either a 30-pin or Lightning connector takes place of the Type-B end. The Type-A end, however, is still the standard size.

--HISTORY--

USB versions:

USB 1.1: Released in August 1998, this is the first USB version to be widely adopted (the original version 1.0 never made it into consumer products). It has a top speed of 12Mbps (though in many cases only performs at 1.2Mbps). It’s largely obsolete.

USB 2.0: Released in April 2000, it has a max speed of 480Mbps in Hi-Speed mode, or 12Mbps in Full-Speed mode. It currently has the max power out put of 5V, 1.8A and is backward-compatible with

USB 1.1.

USB 3.0: Released in November 2008, USB 3.0 has a top speed of 5Gbps in SuperSpeed mode. A USB 3.0 port — and its connector — are usually colored blue. USB 3.0 is backward-compatible with USB 2.0 and its port can deliver up to 5V, 1.8A of power. This is sometimes refereed to as USB 3.1 Gen 1.

USB 3.1 (sometimes refereed to as USB 3.1 Gen 2.): Released on July 26, 2013, USB 3.1 doubles the speed of USB 3.0 to 10Gbps (now called SuperSpeed+ or SuperSpeed USB 10 Gbps), making it as fast as the original Thunderbolt standard. USB 3.1 is backward-compatible with USB 3.0 and USB 2.0. USB 3.1 has three power profiles (according to USB Power Delivery Specification), and allows larger devices to draw power from a host: up to 2A at 5V (for a power consumption of up to 10W), and optionally up to 5A at either 12V (60W) or 20V (100W). The first USB 3.1 products are expected to be available in late 2016, and will mostly use USB Type-C design.

A compatible Type-C USB cable from Aukey that has a Type-A end.

USB Type-C (or USB-C:

Physically, the Type-C port and connector are about the same size as those of the Micro-B USB mentioned above. A Type-C port measures just 8.4 by 2.6mm. This means it’s small enough to work for even the smallest peripheral devices. With Type-C, both ends of a USB cable are the same, allowing for reversible plug orientation. You also don’t need to worry about plugging it in upside down as it will function both ways.

Since 2015, USB-C has been widely adapted and used in many phones and tablets. Many new storage devices also use USB-C ports instead of a USB-B port. Almost all devices that support USB 3.1 use the USB-C port. USB 3.1 has a top speed of 10Gbps and can deliver a power output of up to 20 volts (100 watts) and 5 amps.

When you consider most 15-inch laptops require just around 60 watts of power, this means in the future they will be charged the way phones are now, via their little USB port. Apple’s new MacBook has just one USB-C port as the sole peripheral and power port.

Type-C USB also allows for bi-directional power, so apart from charging the peripheral device, when applicable, a peripheral device could also charge a host device. All this means you can do away with an array of proprietary power adapters and USB cables, and move to a single robust and tiny solution that works for all devices. Type-C USB will significantly cut down the a amount of wires currently needed to make devices work.

USB Type-C is taking over — here are the phones to prove it

One port, one cable, no muss, no fuss.

Type-C USB and USB 3.1 are backward-compatible with USB 3.0 and USB 2.0. In a pure Type-C USB connection, the Type-A ports and plugs are no longer included. However, you’ll find compatible Type A-to-Type C cables. On top of that, there will be adapters to make Type C hosts and devices work with existing USB devices.

This is the first time adapters are required with USB connections, and likely the only time, at least for the the foreseeable future. USB Implementers Forum, the group responsible for the development of USB, says that Type-C USB is designed to be future-proof, meaning the design will be used for future and faster USB versions.

It will take a few years more for Type-C become to become as popular as the current Type-A on the host side, but when it does it will simplify the way we work with devices.

In fact, Intel is even working on a USB audio standard that might render the 3.5mm audio jack obsolete. And with the addition of Thunderbolt 3 now being the super-set of USB-C, eventually, we’ll just have only one type of port and cable to connect all peripheral devices to each other and to a computer. It’s predicted that, thanks to support for USB-C, the adoption of Thunderbolt 3 will take off, which hasn’t been the case with previous versions of Thunderbolt.

Thunderbolt, Firewire, and USB – Speeds and Capabilities:

Ports and cables are constantly changing. It’s helpful to be aware of what Thunderbolt, Firewire, and USB are, and what their capabilities are, when choosing a PC or an audio, visual, or storage device. This way, you will know that you have what you need, for all the projects which you will use your PC for in the future.

Firewire 800 (ieee 1394b) Port:

1. Transfer rates of up to 800 Mb/s.

2. Audio/video devices often use Firewire.

3. For audio production Firewire, TI chipset is recommended

4. Star, tree and daisy chaining for PC cable management – not recommended for audio and video recording.

5. Supports up to 63 devices per Firewire port – not recommended for audio and video recording

6. Isochronous (transfers data in a steady stream).

7. Can provide up to 45 watts of power to devices.

Thunderbolt 3 Port:

1. Due out in the last quarter of 2015.

2. Thunderbolt 3 will provide 40 Gb/s maximum throughput.

3. Isochronous (transfers data in a steady stream).

4. Provides 15 watts of power to Thunderbolt 3, USB-C, and Display Port devices (up to 100 watts of additional power).

5. Will use a different connector than Thunderbolt/Thunderbolt 2 and will require a Thunderbolt 3 to Thunder Adapter to work with Thunderbolt/Thunderbolt 2.

Thunderbolt 2 Port:

1. Thunderbolt 2 provides 20 Gb/s maximum throughput

2. Up to 6 devices can be daisy chained together per Thunderbolt port.

3. Can support Firewire with the use of a Thunderbolt to Firewire adapter which allows the PC to use Firewire without the need of a Firewire card.

4. The use of this adapter, however, is somewhat spotty, especially for audio and video production.

5. Full Duplex (data can go in two directions at once).

6. Isochronous (transfers data in a steady stream).

7. Can provide up to 10 watts of power to Thunderbolt devices.

Thunderbolt Port:

1. Thunderbolt 1 provides 10 Gb/s maximum throughput.

2. Star, tree and daisy chaining for PC cable management.

3. Supports up to 6 devices per Thunderbolt port.

4. Can support Firewire with the use of a Thunderbolt to Firewire converter, which allows the PC to use Firewire without the need of a Firewire card.

5. The use of this converter, however is somewhat spotty, especially for audio and video production.

6. Full Duplex (data can go in two directions at once)

7. Isochronous (transfers data in a steady stream)

8. Can provide up to 10 watts of power to devices.

USB 3.1 Port:

1. USB 3.1 provides 10 Gb/s maximum throughput.

2. Backwards Compatible With USB 3.0 and 2.0.

3. Provides up to 15 watts of power to devices.

4. Full Duplex (data can go in two directions at once).

USB 3.0 Port:

1. Provides a maximum throughput of 5 Gb/s (or 5000 Mb/s).

2. Backwards Compatible with USB 2.0.

3. Maximum USB 3.0 cable length is 3 meters (about 10 feet).

4. Full Duplex (data can go in two directions at once).

5. Provides up to 10 watts of power to devices.

USB 2.0 Port:

1. Provides a maximum throughput of 480 Mb/s.

2. Half Duplex (can only send data in one direction at a time).

3. Maximum USB 2.0 cable length is 5 meters (about 16 feet).

Summarizing USB, Firewire, and Thunderbolt Compatibility.

• Thunderbolt 3 will be backwards compatible with Thunderbolt/Thunderbolt 2 using an adapter.

• Thunderbolt 2 is completely backwards compatible with Thunderbolt 1.

• Thunderbolt 2 is backwards compatible with Firewire using a Thunderbolt to Firewire adapter.

• Thunderbolt 1 is backwards compatible with Firewire using a Thunderbolt to Firewire adapter.

• USB and Thunderbolt/Thunderbolt 2 are not compatible.

• USB-C is backwards compatible with USB 3.0 and USB 2.0, with an adapter.

• USB 3.1 is backwards compatible with USB 3.0 and USB 2.0.

• USB 3.0 is backwards compatible with USB 2.0, BUT USB 3.0 is not compatible with USB 1.1 or USB 1.0.

• USB 2.0 is backwards compatible with USB 1.1 and USB 1.0.

BottomLine:

One port, one cable, no fuss!

Type-C USB and USB 3.1 are backward-compatible with USB 3.0 and USB 2.0. In a pure Type-C USB connection, the Type-A ports and plugs are no longer included. However, you’ll find compatible Type A-to-Type C cables. On top of that, there will be adapters to make Type C hosts and devices work with existing USB devices.